Step 1                   Switch the vehicle ignition on (do not crank the engine yet) and wait for the keypad to illuminate red. Only when illuminated red, should the driver enter their PIN.

Step 2                    The driver should enter their PIN and then press the ‘Enter’ key. The keypad will beep once and illuminate amber to confirm entry and the commencement of PIN authorisation, which takes approx. 10-15 seconds.

Step 3                   When the device/system confirms that that the PIN entered is valid, the keypad will beep twice and illuminate green, the vehicle can then be started normally.

If you mistype your PIN, simply press the ‘Clear’ button & restart the process from Step 2.

*Note – If the driver fails to enter a valid PIN within 20 seconds, a buzzer will begin to sound. The driver will need to turn the ignition off for a minimum of 10 seconds and then start the process again.

Step 1                   Switch the vehicle ignition on. The keypad will remain blank if a driver is already logged in.

Step 2                   Press and hold the ‘Clear’ button for 5 seconds, the driver will hear a long beep, and the keypad will illuminate red.

Step 3                   Release after 5 seconds and the driver will hear a combination of 2 short and 2 long beeps, and the keypad will then illuminate amber.

Step 4                   When the keypad is illuminated red again, the driver can follow the standard login process.